LS > Maple Farm > Boiling > Evaporators > Extrem Serie >

Extrem Serie 2 Hybrid : Wood + WoodChips

Dual Energy high performance evaporator

L’Extrem 2 Hybrid – Wood and chip flexibility, autonomy, and performance
The L’Extrem 2 Hybrid builds on all the advanced features of the Extrem 2 while allowing simultaneous wood and chip heating.
This hybrid model combines the natural strength and warmth of wood with the flexibility and autonomy of chip-fed combustion, ensuring optimal evaporation performance and simplified operation.

Temperature consistency and modulation are maintained at all times through the system’s intelligent electronic controls. The Extrem 2 Hybrid also features a heat recovery system and premium insulation that enhance both soundproofing and energy efficiency.

• Complete gasification combustion with automatic fire modulation;
• Dual wood and chip operation – automatic modulation maintained even without manual wood loading;
• Autonomous chip feeding system (optional conveyor and hopper);
• Maximum heat in the firebox, minimal loss through the chimney;
• High-performance insulation for better heat retention and reduced noise levels;
• Patented smoke-free technology by L.S. Bilodeau for clean, efficient combustion;
• Available options: touchscreen interface, electronic float and level sensors, automatic conveyor, chip hopper, and more.

The automatic chip feeding system provides remarkable autonomy and steady temperature control. It uses a renewable, local resource from your sugarbush or shared through a CUMA (farm equipment cooperative). The chipper shown in our demonstration video is similar to those used by many of our customers.

Based on their experience, a 100–150 HP tractor can produce in roughly 30 hours enough high-quality chips to fuel an operation of about 1200 barrels (115,000 taps) for an entire season. Fuel granulometry plays a key role: a consistent chip size of about ½ inch × ½ inch provides excellent performance and easier system adjustment.

As for wood type, all species combined provide similar combustion results, even with lower-quality wood. We recommend chipping at 20–22% moisture content and storing the chips in a dry, covered area. When maintained at this moisture level, the chips remain stable for months or even years without losing performance.

Available in multiple sizes, from 2½' × 8' up to 6' × 16'.
Contact <your maple equipment advisor for a complete, customized estimate.